Charger Battery

With reverse pole protection & low battery voltage protection, SKC series battery chargers is suitable for serving in automatic

MAIN FUNCTION
1.Reverse pole protection.
2.Over charge protection.
3.Output current display.
4.With float voltage charging.
5.Application:Automotive repairing factory, diesel motor
set, motorcycle, safty lighting, etc.
PRIMARY TECHNICAL PARAMETER
Input voltage:220V±10%
Frequency:50Hz/60Hz
Output voltage:12V
Output current:12A,20A,30A
Over voltage points:14V±0.5V
BATTERY CHAGER SPECIFICATION
Model				SKC-6A	SKC-10A	SKC-15A	SKC-30A
Nominal Battery Voltage				12V DC	12V DC	12V DC	12V DC
Maximum Output-Current(Amps ave)					10A DC	15A DC	30A DC
Total Battery Capacity        (recommanded range)				30Ah~150Ah	100Ah~200Ah	200Ah~300Ah	100Ah~500Ah
Maximum total load on              batteries during charging				6A DC	10A DC	15A DC	30A DC
Maximum Voltage Electronic Regulation				14.50V  25
Mains Supply Voltage				220~240Vac 50~60Hz
Maximum Consumption				72VA	120VA	180VA	360VA
Tolerance to Mains supply distortion				16%THD
Mains protection				Reverse polarity, short circuit
Output Protection				short circuit, charging full
Temperature range				-10~45
Metering:Amps Analogue Moving Coil				10A FSD	15A FSD	20A FSD	50A FSD
Cabinet:W×D×H				200×163×125	200×163×125	200×163×125	200×163×125
Connections:input				5A 3pin 2m cable	10A 3pin 2m cable	10A 3pin 2m cable	10A 3pin 2m cable
Connections:output				100A Binding posts	100A Binding posts	100A Binding posts	100A Binding posts
Connections:output cable minimum size				10mm2 Per2m	10mm2 Per2m	10mm2 Per2m	10mm2 Per2m

Charger Battery